Our EB jaw crushers deliver high-throughput primary crushing with lower maintenance demands. Developed for tough mining duties, these compact, robust machines are a reliable choice for demanding material and rock processing operations where uptime, consistent product sizing, and fast service intervals are critical.
The most compact crusher in the EB range, the EB 09-07 is a single-toggle jaw crusher designed for primary crushing duties where space is limited, but throughput cannot be compromised. With capacities from 104 to 288 tph, it delivers reliable reduction of medium-hard to hard rock. Hydraulically assisted gap setting, reinforced frame, and high-strength cheek plates ensure durability and fast service in demanding conditions.
A mid-range single-toggle jaw crusher, the EB 11-08 is built for sustained primary crushing of medium-hard to hard rock, with accessible bearings and one-piece crushing jaws that simplify planned maintenance and reduce service time. Optimised crushing chamber geometry and hydraulically assisted gap setting deliver consistent product sizing across variable feed conditions, with capacities from 164 to 446 tph.
With capacities from 207 to 523 tph, the EB 12-10 handles higher-tonnage primary crushing duties. An integral motor base eliminates the need for local engineering and fitting, simplifying transport, installation, and commissioning. Hydraulically assisted gap setting, optimised chamber geometry, and high-inertia flywheels combine to deliver high throughput with lower energy peaks and uniform wear across the crushing tools.
The crushing chamber geometry is engineered for an optimal nip angle, suited to hard and tough materials. Enhanced kinematics deliver a high stroke in both the feed and discharge areas, ensuring fast material throughput and consistent product sizing. Efficient utilisation of the full chamber length results in lower, more uniform wear on the crushing tools.
Reinforced front and back walls, cheek plates of high-strength special steel, and a strengthened swing jaw design absorb peak loads reliably. Crushing jaws can expand freely, preventing the transmission of high stresses to other components and extending housing life. All bearings are accessible and can be installed or removed using sleeves, simplifying planned maintenance. On the EB Pro, housing parts and the swing jaw have been designed using bionic calculation methods, with a patented front-wall solution that improves peak-load absorption and extends component service life.
All models feature hydraulically assisted gap setting for fast, repeatable CSS changes. The EB Pro offers an optional fully hydraulic gap adjustment that can also discharge tramp metal or other non-crushable components contained in the feed, further reducing unplanned downtime. CSS adjustment ranges from 50 mm to 250 mm, depending on the model, allowing operators to tune product size to downstream requirements.
Speed and temperature sensors monitor proper functioning across the range. The EB Pro adds Gyramatic™ monitoring and control options, providing operators with real-time data for condition-based maintenance and process optimisation.
V-belt drive with good accessibility for easy maintenance. Generously dimensioned flywheels allow the use of smaller electric motors while maintaining high crushing energy, contributing to lower installed power and reduced energy cost per tonne crushed.
Optimised design helps reduce energy consumption by up to 25% compared with competing solutions, lowering power use while maintaining strong performance.
Maintenance can be carried out from above for safer access, supporting up to 20% faster service times and reducing overall maintenance risk.
Longer-lasting bearings and wear parts extend service life by up to 10%, helping reduce waste and support more sustainable use of materials.
Capacities are application-dependent and indicative. Actual throughput depends on feed material characteristics, desired product size, and machine settings.
Optimised kinematics deliver up to 10% higher throughput than the market benchmark. Generously dimensioned flywheels with high moments of inertia absorb peak loads without stalling, maintaining steady throughput. The result is efficient chamber utilisation that improves consistency across variable feed, helping operators meet targets with fewer interruptions.
The best crusher is one that keeps running. Maintenance-optimised wear elements, accessible bearings with sleeves, and hydraulically assisted gap setting reduce service times by up to 20%. A fully hydraulic gap adjustment option (on EB Pro models) speeds changeovers and improves repeatability. Meanwhile, safer, above-crusher access enables quicker service and reduces maintenance risk.
Optimised crusher geometry and energy-smoothing reduce energy consumption by up to 25% compared with competing solutions. More uniform wear across the crushing chamber extends the service life of bearings and wear parts by up to 10%, reducing consumables waste and re-handling.
FLS application engineering ensures each EB jaw crusher is configured for the specific feed and target product. Digital monitoring capabilities, including Gyramatic™ monitoring and control on the EB Pro, provide actionable insights for predictive maintenance and optimised operation, while a global network of service centres supports rebuilds, upgrades, and OEM-quality wear parts across the equipment lifecycle.
Whenever you need us, our maintenance and repair crews are on hand to help, from specialist advice and inspections to modifications and upgrades, as well as damage analyses and repairs, all performed exclusively by our highly qualified assembly personnel using high-quality, certified jaw crusher parts. If necessary, we will maintain and repair your crusher at one of our service centers. You can call on these services not only for crushers from our own production lines, but also for machines manufactured by other suppliers.
Featuring the latest generation Pro design, the EB 14-11 Pro jaw crusher is designed for the most demanding primary crushing operations. A modular, bolted housing simplifies transport and service, while the bionics-informed geometry of the swing jaw and front wall improves load-peak absorption and extends component life. Capacities range from 300 to 675 tph, with an optional fully hydraulic gap adjustment for automated CSS changes and tramp-metal clearance, and a two-jaw configuration for large-capacity duties.
The EB 16-12 Pro jaw crusher combines bionics-informed design with optimised crushing chamber geometry to deliver up to 10% higher throughput rates and 25% lower energy costs compared to market benchmarks, with capacities from 400 to 1,200 tph.
The largest in the EB Pro range, the EB 20-15 Pro jaw crusher sets a new benchmark for high-tonnage primary crushing of medium-hard to hard ore and rock, with capacities up to 1,600 tph. A bolted, modular housing with patented screw connections simplifies transport, assembly, and service, while the bionics-informed swing jaw and front wall geometry absorbs load peaks and extends component life.
Enhance productivity and cut maintenance costs with FerroCer™ and FerroComb™ wear panels.
Full-flowsheet support for your mining equipment spare parts, with the OEM stamp of approval.
Particle sizing solutions for laboratories including hand-held test sieves and manual sieve shakers.
High Pressure Grinding Rolls (HPGR) are the most efficient comminution product for milling.
Expert field services – repair and maintenance, turnkey project work, full automation support, and more.
Screening media for vibrating screens, trommel screens, static screens and interstage screens.
ARMOUR™ mill liners provide reliable mill protection while maximising availability and throughput.
Hybrid belt-over-apron feeders combine the benefits of both technologies to offer reliable handling of challenging materials.
Rugged and reliable, our jaw crushers are designed to perform and engineered to last.